Industry professionals using overhead cranes for material handling are continuing to use the Crane Operator’s Manual to support lifting operations. The manual is Specification No. 79 from the leading authority on overhead lifting equipment, Crane Manufacturers Association of America (CMAA). The Crane Operator’s Manual, originally published in 2003 and revised four years ago, is the chosen resource by overhead crane operators throughout North America. CMAA is an independent incorporated trade association affiliated with the Material Handling Industry (MHI). Its specifications are available on its dedicated section of the MHI website. Specification No. 79 is a booklet of recommendations prepared by CMAA’s Engineering Committee as a supplement to the original Crane Manufacturer’s Operation and Maintenance Manual with the intent to provide additional information for the operation of overhead and gantry cranes. The Crane Operator’s Manual is now available in either English or Spanish versions. As CMAA representatives frequently point out, operation of a crane involves more than operating the controls. A spokesperson for CMAA said: “The operator must consider and anticipate the motions and actions that will occur as a result of operating the controls. Overhead cranes generally handle materials in proximity to working areas where there are personnel. Therefore, it is important for the crane operator to be instructed in the use of the crane and to understand the severe consequences from careless operation.” The specification is divided into user-friendly sections, including Crane Operators, Crane Motions, Inspections and Handling the Load. The easy-to-navigate contents gives users the ability to find information provided by the industry’s leading crane engineers. The Crane Operators section includes illustrations and explanations of nine hand signals that might be given by a rigger, for example, to an operator in the cab or at the controls of an overhead crane. In the next section, called Crane […]