A safe and economic transport and storage solution for bulk bags. Cabka-IPS announces its most innovative product of 2015, the BigBag Divider. This intelligent product design has been engineered as a smart solution for transporting and storing bulk bags, while at the same time, solving a number of identified challenges due to damages caused from wooden pallet usage. The BigBag Divider was custom-designed for block stacking. It is free of splintering and sharp edges and protects the bags stacked in this manner against abrasion and damage. The main elements are the four-sided fork shafts, which enable easy and safe stacking using a forklift. The tunnel design protects the bags from contact with the fork arms, which in turn can be retracted smoothly. The transport and block stacking of bulk bags on standard pallets pose a lot of challenges. The large openings at the bottom of the standard pallets can cause damage to bulk bags. Bags filled with powder and granules can shift causing the bags to settle making it difficult to remove from a standard pallet. Nails, splinters and sharp edges on wooden pallets tear the bulk bags causing product to fall out. Therefore, the BigBag Divider offers solutions for all of these realworld issues while making it a reliable source for transport while reducing process costs. Its nestability, when empty, requires very little storage when in transit by truck or sea freight containers. Not only does it save on space, but it reduces CO2 emissions as well. And with bulk bags being a main solution for transporting and storing bulk goods, the BigBag Divider is the product to count on. The BigBag Divider is available in two different sizes, 40 x 40 inches and 43 x 43 inches. It weighs between 14.5 & 18.5 lbs. based upon the […]